Pilot 250

Build Envelope Capacity: 250 x 250 x 250 mm

Maximum Part Weight : 17.5 kg

Accuracy:
Part size < 25,4 mm: ±0.025 mm
Part size = 25,4 mm: ±0.1% x L
Accuracy may vary depending onparameters, part geometry and size, pre-processing or post-processing methods, materialsand environment.

Beam Size:
Standard Beam (0.12 – 0.20 mm) or
Small Beam ( 0.06 – 0.08 mm ) ,optional

Layer Thickness:   0,05 mm minimum; 0,25 mm maximum

Weight: 775 kg (with 48 kg initial fill insidef)

Machine Size (WxDxH): 1105×1052×1965 mm

Laser: Solid-state frequency tripled Nd: YVO4

Wavelength:    355 nm

Controller:   UnionTech™ RSCON

Part Preparation: Polydevs or Materialise Magics

Operating Systems: Windows 7, Windows 10

Input Data File Format: STL

Network Type and Protocol: Ethernet, IEEE 802.3 using TCP/IP and NFS

Electrical Requirements: 200-240 VAC, 50/60 Hz, single phase

Laser Warranty: 5.000 hours or 15 months (whichever comes first)

Base Plate/Recoater Rim: Granite

Systems Control: Closed-loop

Power (nominal): Typically 250 ~350mW (@100kHz) on the target surface of the material under nominal optical path condition

Operating Environment:

Temperature Range: 22–26°C

Maximum Change Rate: 1 °C/hour

Relative Humidity: < 40 % non-condensing

Accessories:

Additional Resin Vat: Optional for PILOT 250

Platform Change Carts:  Manual offload cart optional for PILOT 250

Processing and Finishing: Post-Curing Unit

System Warranty: One-year warranty (under UnionTech’s Purchase Terms and Conditions)