Project Description

3D Printers

RSPro 600

A New Dimension in Stereolithography

  • Cost-effective ownership throughout entire life cycle.
  • Freedom to collaborate and innovate: open design for materials and machine access.
  • Printed parts demonstrate excellent sidewall quality and fine detail, contributing to lower post-finishing requirements.


System Features

  • Scanning speed can reach 15 m/s.
  • Key components are of international top brands, Panasonic of Japan, Optowave America, Scanlab of Germany.
  • Automatic control of surface level and processing parameters.
  • Marble recoating platform frame contributes to excellent surface quality and layer thickness of 0.05 mm.
  • Closed loop control strategy for: Platform movement/Laser power/Resin level resin temperature/Negative pressure
  • CE certification.
  • Convenient assembly and disassembly of platform.



Technical Index

Build Envelope Capacity: 600 × 600 × 500 mm mm

Maximum Part Weight: 77 kg

Accuracy: Part size < 100 mm:  ±0,1 mm; Part size ≥ 100 mm: ±0,1% x L
Accuracy may vary depending onparameters, part geometry and size, pre-processing or post-processing methods, materialsand environment.

Beam Size: Nominal 0,12 -0,20 mm

Layer Thickness: 0,05 mm minimum; 0,25 mm maximum

Weight: 1800 kg (with 330 kg initial fill inside)

Machine Size (WxDxH): 1598×1612×2121 mm

Laser: Solid-state frequency tripled Nd: YVO₄

Wavelength: 355 nm

Controller: UnionTech™ RSCON

Part Preparation: Materialise Magics or Polydevs

Operating Systems: Windows 7, Windows 10

Input Data File Format: STL

Network Type and Protocol: Ethernet, IEEE 802.3 using TCP/IP and NFS

Electrical Requirements: 200-240 VAC, 50/60 Hz, single phase

Laser Warranty: 5.000 hours or 15 months (whichever comes first)

Base Plate/Recoater Rim: Granite

Systems Control: Closed-loop

Power (nominal): Typically 300 ~500mW (@100kHz) on the target surface of the material under nominal optical path condition

Operating Environment:

Temperature Range: 22–26°C

Maximum Change Rate: 1 °C/hour

Relative Humidity:  < 40 % non-condensing


Platform Change Carts: Manual offload cart optional

Processing and Finishing: Post-Curing Unit

System Warranty: One-year warranty (under UnionTech’s Purchase Terms and Conditions)


Similar Products

For nearly 20 years, UnionTech stereolithography (SL) 3D printing equipment has been developed and manufactured in an environment of intense regional competition. The UnionTech product offering for the international market of today reflects the experience that has made it a global leader in stereolithography.